PVC

The elements commonly used in the laying of coverings and flooring, and therefore in the laying of profiles, become alkaline when they come into contact with humidity. We recommend immediate cleaning of the fixing materials to protect the piece against possible loss of appearance. In the event of residues of the installation remaining on the profile, it is possible that the appearance of it may be altered.

This cleaning is done by using a non-aggressive cloth or sponge (do not use scouring pads or other abrasive elements) moistened with clean water or even with some type of neutral soap. It is especially important not to use metallic or abrasive scouring pads, since they can scratch the proand alter its appearance. It is very important that the water is clean so as not to drag dissolved materials on the profile. Profiles should never be cleaned by applying strong acid or alkaline cleaners (commonly used to remove mortar and grout residues from ceramic tiles). Products such as trisodium phosphate, phosphoric acid, hydrochloric acid, perchloric acid, hydrofluoric acid, fluorides in general, caustic soda and ammonia should never be applied. The application of solvents containing haloalkanes should also be avoided, as well as the use of setting accelerators containing chlorides (use chloride-free accelerators).