REUSABLE SYSTEM

Precautions and tips for the installation of levelling systems:

Nivelación_Información

PRODUCT INFORMATION:

Threaded ceramic surface levelling system designed to be reusable. It should be used in conjunction with traditional cross spacers, as the system levels, but does not regulate the size of the grout joint in the same way as the clip and the wedge system.

Nivlación_Intrucciones

home

INSTRUCTIONS

1. Lay the tiles on the tile adhesive, between 1.5 and 8mm apart.

2. Insert the T-shaped metal needle into the tile joint and rotate 90º so it is at right angles with the tile.

3. Level the tiles by rotating the black nut, making sure the T-part does not rotate at the same time (the needle follows the orientation of the orange handle). Tighten the installation with the levelling wrench if desired. You can help levelling by gently pushing down on the tiles.

4. Once the tile adhesive is dry, or preferably just before it is fully dry, unscrew the black nut and rotate the T-part until it is aligned with the tile joint, and simply lift out. Clean the piece and reuse as desired.